Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Lauderdale
Gate installation in Fort Lauderdale runs $1,800 to $7,500 for most residential jobs, with a standard single swing gate on steel posts starting around $1,800 and a full double slide gate with automation closer to $5,000-$7,500. We serve every neighborhood in the city, from Rio Vista to Coral Ridge, and we quote a written price before any work starts. Call (754) 399-1474 and you’ll talk to a live person who can schedule a free on-site measure, usually within 48 hours.
Fort Lauderdale is not an easy city for gate work. The canal system, the salt air, the tight waterfront setbacks, and the daily summer lightning all change what has to happen before a gate goes in. We plan for those conditions on every single job, because we have seen what happens when a crew does not.
Why Vance Gate Repair Fort Lauderdale Is Fort Lauderdale’s Preferred Gate Installation Company
Most of our Fort Lauderdale customers reach us because an existing gate failed, and they want the replacement done without the same failure repeating in two years. Our approach is different in one specific way: every installation starts with a written scope and a written price, handed to you before any tool comes off the truck. That is Haven Standard Clause 1, and we have operated that way since Adrian Vance founded the company in 2014 after years of commercial access-control work.
We also document everything. When our crew leaves a Fort Lauderdale job, you have a photo record of what was installed, how the wiring was run, and where the limit switches were set. That record stays with your file. If a future technician ever needs to service the gate, they are not guessing. That documentation habit came from commercial access-control sites, where a missing wiring diagram means a four-hour service call. We brought it to residential Fort Lauderdale gates because it solves the same problem.
We carry parts and service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your property already has a motor from one of those brands, we can work with it. We do not steer you toward a replacement operator unless the existing one is genuinely beyond repair.
Every visit is backed by our 365-Day Done Right Promise. If the installation is not right within that year, we make it right. No fee. No argument. No expiration date inside the window.
Our Gate Installation Services in Fort Lauderdale
We install and automate gates across Fort Lauderdale, and we modify existing steel and aluminum frames when a full replacement isn’t necessary. These are the four installations we handle most often in this city:
Driveway Gate
A driveway gate in Fort Lauderdale has to survive the environment, not just look good for the listing photos. We install gate frames with post footings sized for sandy, often saturated soil, and we use marine-grade stainless hardware on canal-front properties. The gate itself is only half the job; the operator, the safety edges, the keypad, and the conduit run all have to be planned as one system.
Pedestrian Gate
Pedestrian gates are common in Fort Lauderdale’s older neighborhoods, where a separate walk gate sits beside the driveway. We install and automate these regularly, often pairing a keypad or intercom so delivery drivers and contractors can enter without the owner walking out to the front of the property. On waterfront homes, we use the same corrosion-resistant hardware as on the driveway gate.
Sliding Gate
Sliding gates are the right answer for many Fort Lauderdale driveways, especially in the finger islands and along Las Olas, where a swing gate’s arc would block the sidewalk or the property line sits too close to the street. A slide gate travels on a track or cantilever system and requires a flat run of fence line. We install both rack-and-pinion and chain-driven slide operators, usually from LiftMaster, FAAC, or BFT.
Swing Gate
Swing gates remain the classic Fort Lauderdale look, particularly on older Rio Vista and Colee Hammock homes with original wrought iron frames. The problem is that those original frames were never engineered for automation, and after decades of salt exposure, the hinge posts are often compromised. We evaluate the post integrity before mounting an operator. If the post is unsound, we tell you and price a replacement. We do not bolt a new operator to a post that will sag within a year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Lauderdale
We service gate operators from LiftMaster, FAAC, BFT, and Mighty Mule directly, and we stock common control boards, safety photo-eyes, and accessory parts for those brands locally. That means when a Fort Lauderdale customer’s operator fails, we are not waiting a week on a freight shipment from a national distributor to complete the installation. For older communities in Fort Lauderdale that still run Linear and Elite slide gate operators from the 1990s, we keep retrofit kits available so an aging motor can be replaced without rebuilding the entire gate system.
Common Gate Installation Problems We See in Fort Lauderdale Homes
These are the issues we encounter on Fort Lauderdale job sites more than anywhere else:
- Corroded post footings on canal-front properties. Salt air and canal spray eat through steel hinge posts on older wrought iron swing gates, causing sag that cannot be corrected without replacing the post itself. In neighborhoods like Harbor Beach and the Las Olas Isles, we replace posts on roughly half of all older swing gate installations.
- Underground conduit flooded with brackish water. Rising groundwater in finger-island neighborhoods infiltrates low-voltage conduit, corroding terminal connections and shorting operator control boards from below. We now seal all below-grade conduit junctions and run conduit above the high-water line wherever the site allows.
- Lightning and surge damage to control boards. Fort Lauderdale’s daily summer thunderstorms send power spikes through unprotected gate operators, frying control boards and loop detectors even when the gate itself is mechanically fine. We install surge protection on every new operator, and we recommend it on existing ones.
- Tight waterfront setbacks that rule out swing gates. Many Fort Lauderdale driveways, especially on finger islands, do not have enough lateral space for a swing gate’s arc. In those cases, a slide gate is the only workable solution, and we plan the track and operator placement around existing seawalls, planters, and fence lines.
Pricing for Gate Installation in Fort Lauderdale, FL
Here is what gate installation actually costs in Fort Lauderdale, based on the jobs we price most often:
- Single swing gate, manual: $1,800-$2,800
- Single swing gate with automation: $3,200-$5,000
- Double swing gate with automation: $4,800-$7,000
- Sliding gate with automation: $4,200-$6,500
- Pedestrian gate with keypad entry: $1,500-$2,400
- Post replacement only (steel, set in concrete): $450-$800 per post
What moves the price in Fort Lauderdale is usually the site itself. Canal-front properties with saturated soil, existing conduit that is flooded or corroded, HOA design standards that require specific materials, or a driveway that forces a slide gate instead of a swing gate all add cost. You get the exact number in writing before work starts, and that number does not change unless you change the scope. The estimate is free. Call (754) 399-1474 to schedule one.
If another company has already given you a written estimate, bring it to us. We will review it at no cost and give you a second opinion on the scope and the price.
We Also Serve Cities Near Fort Lauderdale
Vance Gate Repair provides Gate Installation throughout the Fort Lauderdale metro, including Plantation, Pompano Beach, Hollywood, and Margate. If you’re in one of those cities, the same written-price policy and documented photo record apply. We coordinate dispatch from our Miami area office, and Fort Lauderdale crews are on the road in this city every day.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Lauderdale
Because the underground conduit on canal-front properties fills with brackish water, which corrodes the low-voltage wiring and shorts the operator’s control board from below. Fort Lauderdale’s 300-plus miles of navigable canals mean thousands of properties sit inches above a rising water table, and that water infiltrates any conduit junction that was not sealed correctly. We see this constantly in the Las Olas Isles, Rio Vista, and Harbor Beach. The fix is to run conduit above the high-water line and seal every below-grade junction, which we do on every canal-front installation. If your gate fails twice in three years, call (754) 399-1474 and we will inspect the conduit run first.
Yes, and this is one of the most common jobs we do in the finger islands. A slide gate needs a flat run of fence line roughly equal to the gate’s width, plus space for the track and operator post. If the driveway is too narrow for a swing arc, a slide gate is almost always workable. We install rack-and-pinion and chain-driven slide systems, and we size the operator for the gate’s weight and the wind load it will face during hurricane season.
Not usually. Fort Lauderdale properties almost always have utility power available near the gate, and a hardwired operator is more reliable long-term than a solar setup, especially during the daily summer storm cycle when battery banks get less recharge time. Solar operators make sense on remote properties without conduit access, but for most Fort Lauderdale homes, we recommend a hardwired operator with a surge protector.
We plan installations so your driveway stays usable during the work. For a full gate replacement, we remove the old gate in the morning, set posts and run conduit during the day, and have the new gate operable by end of day in most cases. If the job will take more than one day, we install a temporary chain or locked post to secure the opening overnight. Pedestrian access is protected the same way. You will know the sequence before we start, because it is written in the scope.
Yes. All automatic gate operators in Florida must have entrapment protection in place, which means safety photo-eyes and reversing edges or an inherent obstruction sensor. This is not optional, and it is not something we will skip to save money on a job. Every automated installation we complete meets the current UL 325 safety standard. We photograph the safety devices and log their positions in your job file.
How Fort Lauderdale’s Canals Change the Way Gate Installation Must Be Done
Fort Lauderdale’s 300-plus miles of navigable canals, the density that earned the city its “Venice of America” name, means a disproportionate share of residential properties sit directly on brackish, salt-influenced waterways. Gate operators, hinges, and access-control wiring on canal-front properties in neighborhoods like the Isles, Rio Vista, and Harbor Beach corrode and fail at two to three times the rate seen on non-waterfront addresses. That is not marketing language. It is a measurable difference that shows up in service records.
The failure mode starts underground. In the finger-island neighborhoods, we regularly find that low-voltage conduit runs have been infiltrated by rising canal water, corroding terminal connections and shorting control boards from below. A technician who has only worked inland Broward or Orlando will not look for this first. Our crews do, because we have pulled too many waterlogged cables out of conduits that looked fine from the surface.
In the Las Olas Isles, we replaced a rusted swing gate on a canal-front property with a LiftMaster slide gate because the driveway’s tight setback left no room for a swing arc without blocking the sidewalk. Our crew trenched a new conduit two feet above the high-water line, mounted the rack and pinion on a concrete-filled steel post footing, and installed a safety photocell and keypad entry so the owners could let contractors in without leaving the dock. The old underground wiring had been shorting from saltwater intrusion, a problem we see constantly in the finger islands.
That is what a Fort Lauderdale gate installation actually involves. It is not the same job as it is ten miles inland.
What You Get With Every Fort Lauderdale Gate Installation
Before we start, you get a written scope that names the gate type, the operator brand and model, the post size and footing depth, the conduit route, the safety devices, and the exact price. That is Haven Standard Clause 1, and it applies to every job, no exceptions. You also get a named technician with a photo sent before arrival, background-checked and uniformed.
After we finish, you get a documented photo record: what was installed, how the wiring was run, where the limits were set, what the safety devices look like in place. That record is filed with your job and handed to you. If anything needs service later, no one has to guess what is inside the operator housing or where the conduit runs.
And for 365 days after the installation, the Done Right Promise covers you. If something is not right, we make it right. No fee, no argument, no expiration inside that year.
Call (754) 399-1474 for a free on-site measure and a written price. A live person answers, any hour, any day. Tell us what you are dealing with and we will tell you what it will take.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Fort Lauderdale since 2014.