Gate Installation in Plantation - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Plantation

Gate installation in Plantation usually lands between $2,400 and $9,800 depending on whether you’re adding a single swing gate to a driveway or a full double-gate automated system with access control. We serve every Plantation neighborhood, from the HOA subdivisions east of University Drive to the acre-plus equestrian properties in Plantation Acres. Most standard swing gate installations are completed in one to two days once materials are on site. If you’re planning a new gate or replacing one that’s failed, call (754) 399-1474 and we’ll write up a fixed price before any work begins.

Call (754) 399-1474

Adrian Vance founded this company in 2014 doing commercial access-control documentation, and that habit carried into every Plantation gate job we touch. Before anyone picks up a tool, you get the price in writing. Before we leave, you get a photo log of what we found, what we installed, and how it was set. That’s the only way a gate installation should be done around here.

Why Vance Gate Repair Fort Lauderdale Is Plantation’s Preferred Gate Installation Company

Plantation homeowners keep calling us back for one reason: the paperwork. Under Clause 1 of The Haven Standard, every job starts with a written scope and a written price, handed to you before we unload a single tool. No verbal estimate, no “we’ll see how it goes,” no invoice that surprises you at the end. You know the number. We stick to it.

Our technicians are background-checked and uniformed. You’ll get a name and photo before arrival, not a vague “someone will be out between 9 and 4.” A live person answers the phone 24/7, so when your Plantation HOA gate fails on a Sunday morning before the board meeting, you reach a human who can start the conversation.

We’ve also worked on enough Plantation gate systems to know what the builder put in, what’s since failed, and what the canal moisture has done to the hardware. That local knowledge means fewer surprises once the post holes are dug.

Fast, Reliable Gate Installation Across Plantation

Gate installation in Plantation typically runs $2,400 to $9,800, depending on the gate style, the operator brand, and whether we’re pulling new conduit and power. A standard single swing gate with a Linear or Ghost Controls operator lands in the $2,400-$4,200 range. A heavy custom double swing gate at a Plantation Acres estate with a FAAC or BFT hydraulic operator runs $6,500-$9,800. Call (754) 399-1474 for a written price on your specific setup. Every estimate is free, and the number is fixed before we start.

Plantation’s housing stock demands a different approach than most cities. The 1980s and 1990s HOA subdivisions east of Flamingo Road were built with automated entry gates as part of the original community design, and those systems are now aging out in waves. The Plantation Acres neighborhood adds another layer entirely: custom ornamental iron and ranch-style wood gates on acre-plus lots, hung heavier and built to different standards than the shared community entries. Our Gate Installation team handles both, and we don’t treat them as the same job. A 1992 Linear operator on an HOA entrance is a board-changeover problem. A sagging custom iron gate in Plantation Acres is a footing, hinge, and panel-weight problem. Different failure modes, different parts, different solution.

Before

After

Our Gate Installation Services in Plantation

Swing Gate Installation

Most Plantation driveways are built for swing gates, and most of the ones we replace were installed with operators that were undersized for the panel weight. We size the operator to the gate, not the other way around. For a single swing gate in a typical Plantation subdivision, that usually means a 1/2 HP electromechanical operator from Linear or Ghost Controls. For a heavier custom gate in Plantation Acres, we’ll often go to a FAAC or BFT hydraulic unit. The written quote includes the operator, the arm or piston, the hinge reinforcement, and the safety photo-eyes required under UL 325.

Double Gate Installation

Double gates fail fastest when the center hinge post wasn’t reinforced for the combined panel weight, and Plantation’s 1990s HOA communities are full of that exact problem. We pull the post, set a new one at proper depth with concrete, and then install matched operators so both leaves open and close in sync. On double gates, we always run a separate safety edge on each leaf and a photo-eye across the full opening. If the original install skipped the entrapment protection, we add it as part of the job, not as an extra line item buried in the invoice.

Security Gate Installation

For Plantation homeowners and HOA boards that need controlled access, we install full security gate systems with keypad entry, vehicle loop detectors, and optional telephone entry. On HOA entrance points, we coordinate the install around board meeting schedules and budget approvals, and we provide the written scope the board needs to vote on the work. For a private estate in Plantation Acres, we’ll add the access control hardware that makes sense: a keypad on the gate post, a loop detector buried in the driveway, and a receiver that works with whatever remotes you already have.

Pedestrian Gate Installation

Pedestrian gates look like a smaller job, but they’re often the weak point in a Plantation perimeter. A manual pedestrian gate with a sagging hinge and a latch that no longer catches does nothing for security. We install new pedestrian gates with self-closing hinges, magnetic locks or keypad entry where needed, and proper post footings. The canal moisture in Plantation accelerates rust on cheaper hardware, so we spec stainless or powder-coated aluminum on every pedestrian install.

Sliding Gate Installation

Sliding gates are less common in Plantation than swing gates, but they show up on some wider driveways and a few HOA rear entrances. We install cantilever and track-style sliding gates with rack-and-pinion or chain-drive operators. If you’re converting from a failed 1990s slide gate operator, we’ll pull new conduit, set a new operator base, and add the loop detector and photo-eye the old system never had.

Trusted Brands We Service in Plantation

We service and install nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Plantation customers, that matters because we’re not tied to any single manufacturer. If your HOA already runs Linear operators, we’ll install Linear-compatible hardware and keep the remote system consistent. If a Plantation Acres estate calls for a heavy custom gate, we’ll spec the FAAC or BFT unit that works best for the weight. We keep common boards and parts stocked locally so a Plantation job doesn’t stall waiting on a freight shipment.

Common Gate Installation Problems We See in Plantation Homes

• Builder-grade operators failing at the 3-5 year mark. Plantation’s newer subdivisions along SW 14th Street and north of Broward Boulevard were built fast, and the gate operators were often the cheapest line item in the spec. Double swing gates with undersized operators and unreinforced hinge posts are a repeat pattern we see across the city.
• Manual gates with no conduit for future automation. Homes built in Plantation’s original 1960s and 1970s developments often have a perfectly good manual gate but no power run to the post. Running conduit later means trenching through HOA easements and canal buffer zones, which requires board approval and careful routing.
• Canal-adjacent corrosion. Many Plantation neighborhoods sit directly against Broward County’s canal network. Gate posts, hinges, rollers, and steel frames pick up moisture continuously, not just in summer. We see rusted post bases and seized rollers on gates barely ten years old.
• Legacy operator changeovers. The 1980s and 1990s HOA gates across Plantation were often built with Eagle Access or early-generation Linear units. Those boards are discontinued. A job that starts as a board swap regularly ends as a full operator changeover with new entrapment protection to meet current UL 325 code.

The Plantation Gate Installation Reality Most Companies Won’t Tell You

Plantation was developed as one of the largest master-planned cities in the US, and most of its HOA communities were built out between the 1960s and 1990s. The automated entry gates installed during that build-out are now reaching end-of-life together, and the result is a wave of operator changeovers concentrated in a single city. Plantation gate technicians face a higher-than-average rate of jobs that open as a board swap and close as a full operator replacement, because the replacement boards for legacy Eagle Access and early Linear units simply don’t exist anymore. Neighboring Weston doesn’t have this problem; it was built later with newer systems. Plantation does, and that means HOA boards and homeowners need a gate company that can honestly explain when a repair is possible and when it’s throwing money at dead hardware.

We recently took over a gate installation at a Plantation Acres equestrian estate where the original ranch-style wood gate had been hung manual on a shallow post footing that never stood a chance against the canal moisture. Our crew pulled new conduit and power for a heavy-duty FAAC swing gate operator, set a proper deep post footing, and added a safety photocell and keypad entry. The homeowner now has automation that won’t sag or rust out in two seasons. That’s the difference between a gate install that looks fine for a year and one that holds up for fifteen. We photograph the post depth before concrete. We document the operator serial number and the limit-switch settings. We hand you the record when we leave.

Pricing for Gate Installation in Plantation, FL

We Also Serve Cities Near Plantation

Beyond Plantation, our crews regularly handle gate installation in Fort Lauderdale, Margate, Pompano Beach, and Hollywood. Scheduling is coordinated from our Miami office, and crews dispatch locally to Plantation throughout the week, including weekends for HOA and estate projects that need to work around board schedules.

FAQs - Gate Installation in Plantation