Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Fort Lauderdale, FL
Gate access control in Fort Lauderdale usually means one of two jobs: replacing a keypad or receiver that salt air has eaten from the inside, or retrofitting an older waterway property with modern entry hardware the original builder never planned for. Most jobs run between $180 and $1,400 depending on the equipment and the condition of the wiring behind it. Call (754) 399-1474 and you’ll get a written price before any work starts.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale’s canal network does more than shape property values. It shapes failure rates. On finger-island streets in Las Olas Isles, Rio Vista, and Harbor Beach, the same salt-laden air that pits aluminum gate frames also works its way into keypad housings, terminal blocks, and low-voltage conduit. We regularly find underground conduit runs where canal water has wicked up through the pipe and corroded splices from the inside, a failure mode you simply don’t see in inland Broward neighborhoods. The housing stock compounds it. Postwar concrete-block homes in places like Coral Ridge and Victoria Park often have original wrought iron swing gates that were never designed for automation. When a homeowner wants a keypad or intercom added, the gate itself usually needs hinge and bracket work first. And in the HOA communities built between the late 1970s and mid-1990s, aging Linear and Elite slide operators are reaching end of life in clusters, which means boards, receivers, and edge sensors fail within weeks of each other across the same development.
Our Main Fort Lauderdale Services
These are the three services Fort Lauderdale homeowners call about most often.
Gate Repair in Fort Lauderdale
A gate that drags, binds, or refuses to latch on a canal-front Fort Lauderdale property is rarely a single problem. The salt environment attacks hardware from multiple angles at once. We send a technician who documents what he finds with photos. Gate Repair in Fort Lauderdale.
Gate Installation in Fort Lauderdale
New gates in Fort Lauderdale have to be specified for the environment. Aluminum with marine-grade powder coating holds up far better than raw steel this close to brackish water. We measure, quote, and install with a written scope. Gate Installation in Fort Lauderdale.
Gate Motor & Opener in Fort Lauderdale
Lightning strikes during summer thunderstorms are a leading cause of motor and control-board failure in Fort Lauderdale. When a board fries, we identify the brand and replace or repair it, and we photograph the old board’s damage before it leaves the property. Gate Motor & Opener in Fort Lauderdale.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Fort Lauderdale
Fort Lauderdale properties on salt-influenced canals fail access-control equipment at roughly two to three times the rate of inland homes. Keypads corrode, card readers short, and phone-entry boxes fill with moisture during the June-to-September storm season. Our Gate Access Control work in Fort Lauderdale focuses on replacing failed components with hardware rated for coastal exposure, then documenting every wiring change in a photo log you keep.
Keypad Entry
Signs you need it
You’ve replaced the keypad once in the last three years and the new one is already showing white corrosion around the buttons.
What it costs in Fort Lauderdale
A new keypad with weather-sealed housing typically runs $220 to $850 in Fort Lauderdale, depending on whether we can reuse the existing wire run or need to pull new low-voltage cable.
How we do it
We open the old housing, photograph the corrosion, verify the wire gauge, install the replacement with dielectric grease on every terminal, and photograph the finished connection.
Phone Entry
Signs you need it
The call box works intermittently after rain, or the speaker crackles when a visitor presses the button.
What it costs in Fort Lauderdale
Phone-entry systems in Fort Lauderdale run $500 to $2,200 installed, with the spread driven by whether the underground conduit to the pedestal is still dry enough to reuse.
How we do it
We test the line voltage at the pedestal, inspect the conduit for water infiltration, replace the failed unit, and leave you a written record of the wiring schematic.
Remote Control
Signs you need it
Remotes work only from inside the car near the gate, or one remote stopped working while the others still function.
What it costs in Fort Lauderdale
Receiver replacement or reprogramming in Fort Lauderdale typically falls between $180 and $425, including the new receiver and programming all remotes on site.
How we do it
We test the existing receiver’s range, check for interference from nearby canal-bridge radio equipment, install the replacement, and program every remote before we leave.
What Gate Access Control Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Keypad replacement with weather housing | $220 - $850 |
| Phone entry system | $500 - $2,200 |
| Receiver replacement and remote programming | $180 - $425 |
How fast can access control be fixed in Fort Lauderdale?
Most keypad and receiver repairs are same-day jobs. Phone-entry systems sometimes need a part ordered, which adds a day or two. Call (754) 399-1474 for a written price before we schedule.
Does salt air really affect keypads in Fort Lauderdale?
It does. Canal-front homes in Rio Vista and Las Olas Isles see keypad failures at roughly double the inland rate because brackish humidity infiltrates the housing and corrodes the contact points. Coastal-rated hardware is the difference.
Gate Parts & Welding in Fort Lauderdale
Fort Lauderdale’s older wrought iron gates were built by hand and never intended for automation. When a hinge sags or a post cracks, there’s no off-the-shelf fix. Our Gate Parts & Welding service fabricates replacements on site, matches the original profile, and documents the job with photos from the first cut to the final weld.
Hinge Replacement
Signs you need it
The gate scrapes the driveway at the latch side or a hinge pin has developed play you can feel when you lift the gate.
What it costs in Fort Lauderdale
Heavy-duty hinge replacement in Fort Lauderdale runs $180 to $650 per pair depending on gate weight and whether we need to cut the old weld out or can bolt the new hinge on.
How we do it
We support the gate, cut the failed hinge free, weld or bolt the replacement, and photograph the finished mounting position from three angles.
Custom Welding
Signs you need it
A picket has snapped at the rail, or the gate frame has cracked near a stress point where the opener arm attaches.
What it costs in Fort Lauderdale
Custom welding work in Fort Lauderdale is $180 to $490, with the final number set by crack length, material thickness, and whether the repair needs on-site powder coating to resist the salt air.
How we do it
We grind the crack back to clean metal, weld the joint, then photograph the finished pass so you can see the penetration before it’s painted.
What Gate Parts & Welding Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hinge replacement, heavy-duty pair | $180 - $650 |
| Custom welding repair | $180 - $490 |
| Gate roller replacement | $140 - $350 |
Do you weld on site in Fort Lauderdale?
Yes. We bring a mobile welding rig to the property, so rail and hinge repairs happen without removing the gate. Your written price is set before we strike an arc. Call (754) 399-1474.
Is original wrought iron worth repairing?
In most Fort Lauderdale neighborhoods, yes. The original material is often thicker than modern replacement steel, and matching the original profile preserves the home’s look. We repair rather than replace whenever the structure is sound.
Brands We Service in Fort Lauderdale
We work on Mighty Mule, LiftMaster, FAAC, and BFT operators, among others. For most Fort Lauderdale jobs we carry common receivers, keypads, and control boards on the truck. Our brands page lists the full set, and we stock parts for every one of them.
Pricing for Gate Repair in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Keypad replacement | $220 - $850 |
| Phone entry system | $500 - $2,200 |
| Receiver replacement | $180 - $425 |
| Hinge replacement, per pair | $180 - $650 |
| Custom welding | $180 - $490 |
| Gate roller replacement | $140 - $350 |
Water intrusion into underground conduit is the number one thing that pushes a Fort Lauderdale gate price higher, because pulling new wire through a waterlogged run adds labor no one can see from the surface. Under the Haven Standard, your price is written before any work begins, so you’ll never find conduit surprises on the invoice after the fact.
Neighborhoods We Serve in Fort Lauderdale
We work across the city, from the canals to the inland grid. In most neighborhoods, a technician can be on site the same day you call.
- Las Olas Isles
- Rio Vista
- Harbor Beach
- Coral Ridge
- Victoria Park
Service Area - Cities Near Fort Lauderdale
If you’re in a neighboring city, we cover those too. We routinely run calls to Plantation, FL, Pompano Beach, FL, Hollywood, FL, and Margate, FL. Call (754) 399-1474 and we’ll tell you when we can be there.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Lauderdale
Most repairs, keypad swaps, and receiver replacements don’t need a permit. New installation or major structural work may, and your HOA may have its own rules. We’ll tell you at the estimate what applies to your property. Call (754) 399-1474.
Most calls get same-day service. We’ll give you a window when you call, and the technician arrives with a name, photo, and your written price. Call (754) 399-1474 to schedule.
Yes, and we’re used to it. Fort Lauderdale HOAs built in the late 1970s through mid-1990s often have aging Linear and Elite slide operators. We document everything in writing, which HOAs appreciate. Estimates are free.
Call (754) 399-1474 for a free estimate, or keep reading at home.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.