Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hollywood
Gate repair in Hollywood usually means one of three things: a motor that quit, a gate that drags or sags, or a keypad that stopped accepting codes. We fix all three, usually the same day. Our techs know Hollywood’s 55-plus communities, its salt-air corrosion patterns, and the specific operator brands installed across Emerald Hills, Hollywood Hills, and the Intracoastal corridors. Call (754) 399-1474 and you’ll get a live person, a straight answer, and a written price before any tool comes off the truck.
Why Hollywood Homeowners Call Vance Gate Repair
Hollywood’s gate problems are not the same as Fort Lauderdale’s. The salt air off the Intracoastal reaches further west than most residents realize, and the city’s dense cluster of 1970s-to-1990s planned communities means we spend a lot of time on aging iron swing gates and slide operators that have been in service for 25 or 30 years. Our Gate Repair team arrives with the brackets, boards, and hinges most common to Hollywood’s older stock already on the truck, because we keep our local parts inventory matched to what actually fails here.
Many of our Hollywood customers found us after a different company quoted a full replacement when the motor only needed a gear or a limit reset. That fits the way we work: Adrian Vance started in commercial access control in 2014, where documenting what was found and what was changed was standard practice. We brought that same habit into residential work. Every Hollywood visit leaves you with a photo log of the repair and a written record of the part number installed. No guesswork, no “trust us.”
What Hollywood Customers Notice About Us
- Written price first. Before we start, you get a line-item scope and a flat price in writing. That’s Haven Standard Clause 1. The number we hand you is the number on the invoice.
- We show our work. Photos of the corroded hinge, the misaligned photo-eye, the reset limit switch. You keep them. We file them in your job record.
- A live person answers 24/7. No voicemail loop, no automated attendant. If a gate motor fails at 11 p.m. the night before a hurricane watch, someone picks up.
- 365-Day Done Right Promise. If the repair isn’t right, we make it right within a full year, no argument, no extra fee.
Our Gate Repair Services in Hollywood
Electric Gate Repair
Electric gate repair in Hollywood covers operators, control boards, photo-eyes, loop detectors, and power supply issues. In the city’s 55-plus and snowbird communities, we see specific failure patterns: capacitors burned out from salt-bridged loop-detector wiring, control boards corroded from humidity inside the operator housing, and worm gears stripped because a gate was cycling ten times a day with no maintenance while the owners were up north. We diagnose the failing component and replace only what’s needed, not the whole operator.
Automatic Gate Repair
Automatic gate repair means restoring the full sequence: remote activates the board, board commands the motor, motor travels the correct distance, safety sensor confirms the path is clear. When one link fails, the whole system acts dead even if the motor itself is fine. That’s the most common Hollywood scenario we find: a LiftMaster or Mighty Mule operator that’s blamed for a bad limit switch or a misaligned photo-eye. We chase the actual fault and document it.
Hinge & Post Repair
In Hollywood’s ocean-breeze corridors, hinge posts on 1980s iron swing gates rust through at the base within a decade, long before the gate visibly sags. The post looks fine at eye level. Below the soil line, it’s paper. We replace the post, re-set it in concrete, and coat the new steel against the salt environment. In Hollywood, this is one of our most frequent calls: a gate that suddenly drops half an inch, or a post that snaps clean when the wind loads it during a tropical storm.
Gate Realignment
Gate realignment in Hollywood usually follows a sagging hinge or a shifted post. Symptom: the gate drags on the driveway, the latch doesn’t line up, the operator strains and overheats, and the limit switch has to work harder every cycle. We re-level the gate, re-weld or re-shim the hinges, and re-set the operator travel limits so the motor isn’t fighting the gate’s own weight. The failure is often easy to see but hard to diagnose remotely: the gate looks fine at rest, then binds under load.
Lock Repair & Weld/Rust Repair
Gate locks on Hollywood’s older swing gates are often the original mechanical hardware, now stiff from salt ingress and years of sun. We repair, lubricate, or replace them, including electric strikes and maglocks on HOA entry gates. Weld and rust repair is the city’s constant background job: surface rust on iron gates a block from the Intracoastal is not cosmetic if it reaches the moving parts. We grind, treat, and re-coat, and we replace rusted connector plates before they snap.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hollywood
We service LiftMaster, FAAC, BFT, and Mighty Mule, among the nine major gate-automation brands our techs are trained on. The right answer for an older Hollywood operator is usually repair, not replacement. If a LiftMaster worm gear failed, we replace the gear. If a FAAC board shorted from moisture, we swap the board. We keep the common parts for these brands in local stock, which means a faster turnaround for Hollywood customers than a company that has to order everything from a distributor.
Common Gate Repair Problems We See in Hollywood Homes
- Salt-corroded keypads that look fine. The membrane degrades under UV and salt exposure, so a part-time resident returning in November finds the code no longer registers while the board underneath still looks intact. We replace the keypad and coat the connection points.
- Loop detectors false-triggering. Salt spray bridges the loop wires in Hollywood’s asphalt HOA entrances, making gates cycle open and closed on their own. That repeated cycling burns out operator capacitors fast.
- Worm gears stripped years early. In communities where gates run continuously while owners are away, LiftMaster and slide-gate operators burn out gears and corrode boards within 5 to 7 years instead of the usual 10 to 15. We see this all across Hollywood’s planned gated subdivisions.
- Hinge posts rusted through under the soil. Original iron gates from the 1970s and 1980s in ocean-breeze corridors develop silent post failure: the gate looks square, but the base has corroded to a fraction of its original thickness and is one wind event from collapsing.
Pricing for Gate Repair in Hollywood, FL
Most gate repairs in Hollywood are quoted and agreed in writing before any work begins. That’s our standard, and it applies to every job from a simple limit-switch reset to a full hinge and post replacement. Here’s what Hollywood homeowners should expect based on the work we typically perform in the city:
| Repair Type | Typical Hollywood Price Range |
|---|---|
| Limit switch reset or photo-eye realignment | $95 – $185 |
| Keypad or remote receiver replacement | $175 – $320 |
| Hinge repair or replacement (2 hinges) | $280 – $540 |
| Hinge post replacement with concrete re-set | $650 – $1,150 |
| Slide gate operator gear replacement (parts & labor) | $380 – $720 |
| Full operator replacement (motor, board, arms) | $1,100 – $2,400 |
What moves the price in Hollywood: the age of the original ironwork, whether the post base is rusted through, whether salt has reached the control board, and whether the gate is on an Intracoastal-breeze lot or further inland in Hollywood Hills. You’ll get the exact number in writing before we start. Estimates are free. Call (754) 399-1474 and we’ll set a time.
Hollywood’s Salt Air and Your Gate: What Actually Happens
Hollywood sits directly on the Intracoastal Waterway with the Atlantic less than two miles east. Prevailing onshore breezes carry salt-laden air through the western residential grids, which is why a gate off Stirling Road can corrode nearly as fast as one on a waterfront lot. Steel hinges and iron posts are the first casualties, followed by operator circuit boards and wiring connectors. Annual hurricane checks also reveal a pattern we don’t see in inland Broward cities: automatic operators that work fine in February but have a seized manual-release by August because salt has locked the mechanism. That matters when a named storm is approaching and the gate needs to be locked open.
In Hollywood’s 55-plus communities, like Emerald Hills, the picture is more specific. Residents are often away for five or six months at a time. The gate cycles for daily traffic with no one watching it, no one lubricating the rollers, no one noticing the limit switch drifting. In an inland city, that’s a maintenance gap. In Hollywood, it’s a failure trajectory. Salt corrodes the parts that aren’t moving, humidity invites corrosion into the board housing, and the motor runs harder as hinges degrade. A gate that should last 10 to 15 years dies in 5 to 7. That’s the city we work in every day.
How We Keep Hollywood’s 55+ Communities Running
Hollywood’s master-planned communities, many of them 55-plus or snowbird-oriented, run on shared entry gates. The operators are the community’s first budget line when something fails. Our job is to make those gates quiet, reliable, and easy for residents who may not be back for months.
The work breaks down into three habits: documentation, so an HOA board never pays twice to rediscover a problem; battery backup, so a power cut does not trap anyone in or out; and annual pre-season service, scheduled before hurricane season so the manual release is tested and the gate can be locked open if the storm track is close.
At a 55-plus community off Stirling Road in Emerald Hills, our crew pulled a LiftMaster slide gate operator that had burnt out its worm gear five years early. We replaced the gear, treated the corroded control board, and set up a battery backup so the snowbird residents coming home after a six-month absence wouldn’t find a dead gate. That’s the Hollywood pattern: the failure was predictable, and the fix was specific.
We Also Serve Cities Near Hollywood
Vance Gate Repair covers Gate Repair in Hollywood and the surrounding Broward communities. Our techs regularly drive to Fort Lauderdale, Plantation, Pompano Beach, and Margate on the same day a call comes in. If you’re in a neighboring city and need a written price and a documented repair record, call (754) 399-1474.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hollywood
Salt air from the Intracoastal and Atlantic accelerates corrosion on circuit boards, wiring connectors, and mechanical components, while months-long unattended cycling while residents are away means no one lubricates rollers, re-sets limits, or notices a hinge degrading. Combine those two factors and a 10-to-15-year operator lifespan drops to 5 to 7 years in many Hollywood communities. The fix is not a different brand; it’s corrosion protection, proper sealing, and an annual pre-season check. Call (754) 399-1474 to schedule one.
Yes, and for a specific reason: Hollywood Hills is far enough from the ocean that salt is less of a factor, but the area’s mature tree canopy and overhead power lines mean power outages during summer storms are common. A battery backup keeps the gate operating through a blackout so residents are not trapped in or out. We install backup systems sized to the operator already on the property, not a one-size-fits-all unit.
In most cases, yes. A sagging swing gate is almost always a hinge or post problem, not a gate-leaf problem. We re-set hinges, replace rusted hinge posts, and re-weld where the original ironwork has cracked. The gate leaf itself usually does not need to be replaced unless the structural rails have rusted through from years of uncoated exposure. You’ll see the diagnosis in writing before we start work.
Salt spray bridges the loop wires buried in asphalt, creating false triggers that make the gate cycle open and closed on its own. Each false cycle runs the operator and burns out capacitors faster. In Hollywood, we check the loop wiring readings on every call involving an erratic gate, and we often find the detector is reading a vehicle when no vehicle is present. The fix is usually re-splicing the loop wires and sealing the connections against moisture.
Three things before June 1: test the manual release so the gate can be locked open during a storm, verify that the operator’s battery backup holds a charge, and inspect the hinge posts for rust-through at the base. A gate that can’t be secured open becomes a wind-load hazard during a named storm. We run pre-season hurricane checks for Hollywood HOAs and 55-plus communities every May. Call (754) 399-1474 to get on the schedule.
Get Your Hollywood Gate Repaired, Documented, and Done Right
If your gate is acting up in Hollywood, call (754) 399-1474. You’ll get a live person. You’ll get a written price before any work starts. You’ll get a photo record of what was found and what was fixed. And you’ll get a 365-day promise that the repair is right, with no argument and no fee if it isn’t. That’s the Haven Standard: a written scope, a written price, and evidence on every visit. Serving Hollywood’s 55-plus communities, HOA entrances, and single-family gates from the Intracoastal to Hollywood Hills.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood since 2014.
Gate Repair in Nearby Areas
