Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Plantation
A Plantation Gate Motor & Opener issue usually means one of three things: a swing gate that’s sagging and dragging, an operator that hums but won’t move the gate, or a community entry system that’s been patched so many times the board finally quit. Most Plantation jobs we handle run between $180 and $2,800 depending on whether we’re resetting a limit switch or replacing a full operator. We respond to Plantation from our South FL dispatch office, and a live person answers at (754) 399-1474 at any hour. You get a written price before we touch a tool, and a photo record of everything we changed before we leave your driveway.
Plantation carries a specific set of gate problems, and they’re not the same as what you’d find in Weston or Davie. The city’s master-planned subdivisions went up in a burst between the 1960s and 1990s, which means hundreds of HOA entry gates across Plantation are aging out at the same time. The western Plantation Acres area adds another layer entirely: heavy ornamental iron and ranch-style wood gates on acre-plus equestrian lots that need a different hand than a standard aluminum swing gate on Broward Boulevard or in a gated section off Nob Hill Road.
We know Plantation’s gate stock because we work on it weekly. Our Gate Repair team handles everything from a bent hinge on a single-family driveway gate to a full operator changeover at a community entrance. If you live in Plantation, you’re not calling a company that’s learning your neighborhood on the drive over.
Why Vance Gate Repair Fort Lauderdale Is Plantation’s Preferred Gate Repair Company
Plantation homeowners call us for a reason that has less to do with advertising and more to do with what they see after the job. Every visit ends with a written record: photos of what we found, the part number we installed, and the limit-switch readings we set. That’s the Haven Standard, and it’s not a marketing line. Adrian Vance built this company on commercial access-control documentation habits starting in 2014, and we brought the same record-keeping to residential gates. When a HOA board in Plantation asks what the last technician did to their entry operator, we can hand them the answer.
The 365-Day Done Right Promise covers every repair we complete in Plantation. If the gate isn’t right within that year, we come back and make it right. No fee, no argument. That’s Clause 5 of the Haven Standard, and we’ve honored it since the company started.
Background-checked, uniformed technicians arrive with a name and photo provided before they get there. You’ll know who’s walking up to your gate. And because we service nine automation brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we’re not steering you toward a replacement motor just because we don’t stock the board for the one you already have. We fix what’s fixable and tell you plainly when it isn’t.
Free second opinions are part of how we operate. If you have a written estimate from another Plantation gate company, bring it. We’ll review it with you at no charge. That’s how confident we are in our pricing, and it’s why much of our Plantation work comes from referrals inside HOAs where one board member told the next.
Our Gate Repair Services in Plantation
Electric Gate Repair
Electric gate repair in Plantation nearly always starts at the operator, but it doesn’t end there. We trace the full circuit: control board, transformer, limit switches, photo-eyes, and the wiring run between them. In Plantation’s older HOA communities, we see a lot of early Linear and Eagle Access units that have been limping along with workarounds. When a board is discontinued, we tell you before we start that this may be an operator changeover, not a board swap, and we price it that way in writing.
Automatic Gate Repair
An automatic gate that won’t open is a different problem than one that opens too far or slams at the end of travel. We diagnose the drive system, check the torque settings, and verify the entrapment protection meets current Florida Building Code. That code requirement matters in Plantation specifically because many pre-2005 systems on HOA entrances predate the current standards. Wind-load and safety upgrades aren’t optional patches on those jobs.
Hinge & Post Repair
Plantation’s canal network is beautiful and everywhere, but it saturates soil in ways that punish gate posts. We see hinge posts leaning, heaving, and corroding at the base in neighborhoods from Jacaranda Lakes to Plantation Isles. We recored footings, sleeve rotted steel, and fabricate reinforced posts where the original post has lost structural integrity. A sagging ornamental gate on a Plantation Acres estate almost always traces back to the post, not the gate itself.
Gate Realignment
A gate that scrapes the ground or catches on the latch isn’t just noisy, it’s wearing out the operator and the pinion. We reset swing and slide gates to their correct plane, adjust the hinge alignment, and set the travel limits so the motor isn’t fighting resistance on every cycle. On heavy custom gates, this also means checking that the rack and pinion or chain drive is tracking true, because misalignment there causes the grinding noise our customers call about most.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Plantation
We’re not a single-brand shop. We stock parts and service operators from BFT, Linear, Viking, Ghost Controls, and a half-dozen other majors, which matters in Plantation because the operator on your gate is whatever the developer or builder installed in 1987. We work on that motor. We don’t tell you it’s obsolete just to sell a replacement, but when a part is genuinely discontinued like many early Eagle Access boards, we tell you that straight and give you the changeover price in writing before any work starts.
Common Gate Repair Problems We See in Plantation Homes
- Legacy operator failure in HOA communities. Plantation’s 1980s and 1990s subdivision buildout means a wave of gates reaching end-of-life around the same time. Many still run Eagle Access or early Linear units with discontinued boards, so what starts as a board swap often becomes a full operator changeover.
- Canal-adjacent corrosion and post heave. Broward’s canal system runs through much of Plantation, and the groundwater keeps gate posts, rollers, and steel frames damp year-round. We see hinge posts rotting at the base in as little as eight to ten years, especially on properties backing to water.
- Hurricane wind-load damage on slide gates. Community slide gates take enormous lateral force during tropical weather. Pre-2005 operators and arms simply weren’t rated for current Florida Building Code wind loads, so HOA repairs in Plantation frequently require a code upgrade, not a patch job.
- Misaligned photo-eyes from post drift. The infrared beam that stops a gate when something crosses its path gets knocked out of alignment when a post shifts. A gate that reverses or refuses to close in Plantation is often a post problem, not a sensor problem.
Pricing for Gate Repair in Plantation, FL
Here are real numbers for Plantation’s market. A basic swing gate realignment on a single-family driveway typically runs $180-$320. Replacing a damaged hinge pair on a standard aluminum gate lands between $250 and $550, while recoring and reinforcing a failed hinge post on a heavy ornamental gate starts around $650 and can reach $1,800 if we’re fabricating a custom post. A full operator replacement on a community swing gate in Plantation, including entrapment protection and current-code setup, generally falls between $2,200 and $5,500 depending on the gate’s weight and the operator brand. Weld and rust repair on estate gates runs $150-$700 based on how much steel needs to be cut out and replaced.
We quote the full job in writing before we start. That price is what you pay, no discovery fees, no surprise invoice. Under Clause 1 of the Haven Standard, “Have it in writing,” every Plantation customer gets the flat price handed over before any tool comes off the truck. Call (754) 399-1474 and we’ll schedule a free estimate at your property.
We Also Serve Cities Near Plantation
Our crews work throughout Broward County. Beyond Gate Repair in Plantation, we regularly handle gate jobs in Fort Lauderdale, Margate, Pompano Beach, and Hollywood. If your property sits close to a city line, or your HOA has entrances in two municipalities, we can still help. The same written pricing and documentation standard applies wherever we go.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Plantation
Because Plantation’s master-planned subdivisions were built out in the 1980s and 1990s, and the operators installed then are now 25 to 35 years old. Many run Eagle Access or early-generation Linear units whose control boards and drive components have been discontinued for years. When the board fails, there’s often no direct replacement part available, so the gate has to move to a current operator that supports the gate’s weight, duty cycle, and entrapment protection requirements. A HOA can sometimes keep an old unit running with a salvaged part, but we won’t install a used board and pretend it’s a fix. Call (754) 399-1474 and we’ll tell you honestly whether your operator can be repaired or needs a changeover, with the cost of either option in writing.
The canals raise the water table and keep the soil around gate posts and foundations wet year-round. Steel posts, hinge brackets, rollers, and frame members corrode from the base up, and the soft ground allows posts to lean and heave without any impact damage. A gate that’s suddenly dragging on the driveway in a canal-adjacent Plantation neighborhood usually has a post that’s shifted or rotted below grade. We diagnose the post condition before realigning the gate, because realigning a gate on a failing post doesn’t last. Call (754) 399-1474 to have a technician inspect your gate and give you a written recommendation.
Yes. In most cases the sag comes from the hinge post or the hinges themselves, not the gate’s fabricated steel. We recore the post footing if the soil has let it drift, fabricate a reinforced hinge post when the original has lost its strength, and sometimes weld new hinge plates on the gate frame. The heavy ornamental iron itself usually has decades of life left. We recently reset a Plantation Acres gate that was grinding and tripping its safety photocell because the hinge post had shifted in soft canal-adjacent soil, and the fix required recoring the footing and fabricating a reinforced post, not building a new gate. Call (754) 399-1474 for an on-site inspection and a written repair price.
Often yes. Florida Building Code wind-load requirements changed significantly in 2005, and gates that predate those standards are frequently not rated for the forces they’re now expected to withstand. When a pre-2005 slide gate operator or gate arm is damaged in a storm, patching it back to its original condition may not satisfy current code or the HOA’s insurance requirements. In Plantation’s long-established communities, we commonly see post-storm repairs that require a full operator and hardware upgrade to meet current standards. We walk the board through what’s needed, put it in writing, and include the documentation your insurance carrier will ask for.
Automatic gate operators in Florida must include a primary entrapment protection device, which for most gates is a photo-eye or infrared beam that reverses the gate if something crosses its path while the gate is moving. A secondary device like a reversing edge or current sensing is also required. The specific code is UL 325, which Florida has adopted and enforces on both residential and commercial gate installations. In Plantation, many older operators lack the secondary protection, and when we service or replace a gate operator, we bring the system into compliance rather than leaving a pre-code setup in place. Call (754) 399-1474 to have your gate’s entrapment protection checked.
Contact Vance Gate Repair Fort Lauderdale for Plantation Gate Repair
If your gate is sagging, grinding, or refusing to open in Plantation, call us at (754) 399-1474. We’ll send a background-checked, uniformed technician to your property, diagnose the problem, and hand you a written price before any work starts. You’ll get a photo record of everything we found and everything we changed. That’s the standard on every Plantation job, from a single driveway gate off Peters Road to a full HOA entrance system in Plantation Acres. Free estimates, written pricing, and a live person at the other end of the line, any hour you call.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Plantation since 2014.