Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Sunrise, FL
Gate access control in Sunrise usually means one of two calls: the keypad at the community entrance stopped accepting codes, or the board driving a 1980s swing gate finally quit after one too many lightning storms. Most of these systems sit in HOA-governed communities built before UL 325 safety standards existed, which means the repair conversation often starts with what’s broken and ends with what needs to be brought up to code. If your gate won’t open, won’t close, or won’t recognize a code, call (754) 399-1474 and we’ll tell you what we’re likely looking at before we even dispatch.
Why Sunrise Homes Are Different
Sunrise was built in deliberate waves from the 1960s through the 1990s as one of Florida’s earliest master-planned cities, producing an unusually dense concentration of HOA-governed gated communities. The large 1970s golf communities around Inverrary and the 1990s townhome clusters near the Sawgrass Expressway are running original gate operators that are now aging out at the same time. That’s a different repair profile than Plantation or Tamarac: here, a single technician might service four community entrances on one street, all installed within a few years of each other, all showing the same corrosion patterns.
Flat, low-lying terrain at the western edge of Broward County keeps ground-level humidity high and standing water common after storms, and that eats at operator housings and limit switches faster than in drier inland markets. Hurricane-season wind events bend gate arms and knock slide gates off tracks. And because many 1980s HOA systems predate the 1994 UL 325 safety-reversing mandate, code-upgrade conversations are a routine part of service calls in the older eastern subdivisions, not an occasional surprise.
Our Main Sunrise Services
Two jobs dominate the phone calls from Sunrise: access control that stopped recognizing residents, and gate hardware that rusted or bent past adjustment. The three service pages below cover the other half of what we do.
Gate Repair in Sunrise
Gate repair in Sunrise usually means one of three findings: a swing gate arm bent by a squall, a slide gate off its track after a storm, or a limit switch corroded by months of standing humidity. We show up, document what we find, write the price, and fix it. Most repairs take one visit. Gate Repair in Sunrise
Gate Installation in Sunrise
New gate installation in Sunrise is most common in the 1990s townhome developments near Sawgrass Mills where the original equipment has finally failed past repair. We measure, order, and install with a written scope and price before any work starts. Gate Installation in Sunrise
Gate Motor & Opener in Sunrise
Motor replacement in Sunrise often means pulling a BFT or Linear operator that has been cycling thousands of times per month at a rental complex entrance off Sunrise Boulevard. We service what’s there first, and replace only when the motor is genuinely done. Gate Motor & Opener in Sunrise
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Sunrise
Gate access control in Sunrise usually means restoring entry at communities where the original equipment was installed decades ago and no one on the board knows the master code anymore. Humidity and lightning take out boards and keypads regularly, and in the older eastern subdivisions we’re often the first contractor to point out that the existing system lacks compliant entrapment protection. Gate Access Control is a core service, not an add-on, and a written quote covers every part of the job.
Keypad Entry
Signs you need it
The keypad takes multiple button presses to register, or certain codes stopped working while others still function.
What it costs in Sunrise
Keypad replacement in Sunrise typically runs $180-$340 depending on whether we can reuse the existing housing or need to cut into stucco near the gate.
How we do it
We pull the old unit, check voltage at the wire, mount the new keypad, reprogram all resident codes, and photograph the finished work.
Phone Entry
Signs you need it
The gate rings through to residents but won’t open when they press 9, or the dialer is calling numbers no one uses.
What it costs in Sunrise
Phone entry system repair in Sunrise usually lands between $220 and $400 based on whether the board is repairable or needs replacement.
How we do it
We test dial tone, trace the relay to the gate operator, replace the failed component, and leave a written record of every setting adjusted.
What Gate Access Control Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry system repair | $220-$400 |
| Access control board replacement | $250-$500 |
Can you repair a gate access system the same day in Sunrise?
Yes. Most keypad and phone entry repairs finish same-day if we carry the part locally. Call (754) 399-1474 with the brand and symptom and we’ll give you a written price before dispatch.
Do you work on older gate systems installed before 1994?
Yes, and those make up a large share of calls in eastern Sunrise. We document the existing equipment and explain what needs upgrading to meet current safety standards, with the upgrade priced separately.
Gate Parts & Welding in Sunrise
Gate parts and welding in Sunrise is mostly about hinges and posts that have spent decades in saturated ground air and are now too worn or too rusted to hold a straight gate. The eastern subdivisions with original 1980s hardware are where we see the most snapped hinge pins and corroded post bases. Gate Parts & Welding means we repair what’s there before recommending a bigger replacement.
Hinge Replacement
Signs you need it
The gate sags toward the latch side and leaves a visible gap at the top hinge when closed.
What it costs in Sunrise
Hinge replacement in Sunrise typically runs $150-$325 depending on post condition and whether welding is needed to build up the base.
How we do it
We unbolt or cut the old hinge, weld or bolt the new one in place, re-level the gate, and photograph the bead and the finished alignment.
Post Replacement
Signs you need it
The post is leaning, rusted through at ground level, or the concrete footing is cracked around the base.
What it costs in Sunrise
Post replacement in Sunrise runs $300-$600 depending on metal gauge, footing depth, and whether we core the old concrete or pour new.
How we do it
We cut out the old post, set the new one in concrete, brace it true, weld the hinge plates back on, and document the footing depth before backfill.
What Gate Parts & Welding Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hinge replacement | $150-$325 |
| Post replacement | $300-$600 |
| Rail repair | $180-$380 |
Can you weld a gate post back in place instead of replacing it?
Sometimes. If the post is sound below the rust line, we can weld a sleeve brace over the damaged section. Call (754) 399-1474 and we’ll tell you from photos whether it’s worth doing.
Do you fabricate custom gate parts in Sunrise?
Yes. We cut and weld custom brackets, hinge plates, and rail sections in the field when a stock part won’t match the original hardware, and the price is written before the welder strikes.
Brands We Service in Sunrise
We service BFT, Linear, Viking, and Ghost Controls operators in Sunrise, along with LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Most control boards and keypads for these brands are stocked locally, which keeps repair turnaround short. See our brands for the full list.
Pricing for Gate Repair in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry system repair | $220-$400 |
| Access control board replacement | $250-$500 |
| Hinge replacement | $150-$325 |
| Post replacement | $300-$600 |
| Rail repair | $180-$380 |
| Swing gate motor replacement | $450-$900 |
| Slide gate motor replacement | $600-$1,200 |
In Sunrise, prices push upward when the gate sits on saturated ground and the post footing has rotted out, or when an older system needs code-upgrade work layered onto the original repair. Whatever the number, it is written and handed to you before any work begins.
Neighborhoods We Serve in Sunrise
We service gate systems across the city, from the 1970s golf communities to the 1990s townhome clusters near the Sawgrass Expressway. Response time for emergency gate failures is typically under 90 minutes for most of Sunrise.
- Inverrary
- Sunrise Golf Village
- Welleby
- New River Estates
- Springtree
Service Area - Cities Near Sunrise
Our Sunrise crews also cover the surrounding cities. Fort Lauderdale, FL is the next stop east, and we handle gate systems in Wilton Manors, FL, Oakland Park, FL, and Lauderdale Lakes, FL the same way we do here: written price first, photo record after.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sunrise
In most of Sunrise, a technician can be on site within 90 minutes for an emergency gate failure. We dispatch from the South Florida metro office, and a live person answers the phone around the clock to schedule the visit.
For community entrances, yes, and we provide the written scope and photo documentation that most Sunrise HOA boards request before approving a repair. For individually owned gates, no approval is typically required.
Yes. Every Sunrise job receives a written price before any tool is picked up, covering parts, labor, and any code-upgrade work quoted separately. The number on the invoice matches the number you approved.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.