Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Plantation
Most gate motor repairs in Plantation run between $225 and $480 for a standard service call with parts, while full operator replacements typically land between $1,200 and $3,400 depending on the brand and gate configuration. That’s the honest range, and we put it in writing before any tool comes off the truck. Plantation’s mix of master-planned HOA communities and sprawling Plantation Acres estates means we see a wider spread of gate systems here than almost anywhere else in Broward County. Call (754) 399-1474 and a live person answers, any hour, any day.
We know Plantation’s gate inventory because we work it constantly. The 1980s and 1990s subdivision gates along Broward Boulevard and Sunrise Boulevard still run on motors installed when those communities were built. The Plantation Acres properties east of Flamingo Road run custom ornamental iron gates that were often hung manually and automated years later, sometimes badly. Both situations create predictable failure modes, and we’ve learned exactly how to read them.
Why Vance Gate Repair Fort Lauderdale Is Plantation’s Preferred Gate Motor & Opener Company
We’re not the oldest gate company in Broward County, and we don’t pretend to be. What we are is the company that writes the price down before the work starts, photographs every adjustment and every installed part, and leaves that record with the homeowner when the job is done. Plantation HOA property managers and individual homeowners call us because they’re tired of verbal estimates that turn into invoices they don’t recognize.
Our technicians have walked dozens of Plantation communities: the gated sections off Nob Hill Road, the canal-lined streets running through Plantacion and Jacaranda, the wide lots of Plantation Acres where a gate might sit 200 feet from the road. Each area has its own failure pattern. That local knowledge means faster diagnosis and fewer repeat visits. Every technician is background-checked, uniformed, and you get their name and photo before they arrive.
Under our Gate Motor & Opener service, every job in Plantation carries the 365-Day Done Right Promise: if the repair isn’t right, we make it right within one year at no additional charge. That’s Clause 5 of the Haven Standard, and it applies to every swing gate, slide gate, and barrier arm we touch.
Vance Gate Repair has repaired and installed over 22,000 gates since 2014, and every single one had a written price before the work began. We’re led by Adrian Vance, who started in commercial access control systems before bringing that same documentation discipline to residential work. Dispatch for Plantation jobs is coordinated from our South Florida metro office, and crews run local routes through Plantation daily.
Our Gate Motor & Opener Services in Plantation
Motor Installation
New motor installations in Plantation run $850 to $2,600 for standard residential swing or slide operators, installed and wired. Plantation Acres properties with custom ornamental gates and long power runs can push closer to $3,500 or more when new conduit and upgraded wire are required. We quote the full scope in writing, including the power run, the concrete pad or post reinforcement, and any safety device required for Florida Building Code compliance.
Motor Repair
Repair work on existing Plantation gate motors typically runs $225 to $550, which covers the service call, diagnosis, and most common parts like limit switches, capacitors, and control board repairs. The jobs we see most often in Plantation involve older linear and slide operators whose drive components have worn from years of Broward humidity and canal-adjacent moisture. We restore what’s serviceable and replace what isn’t, and we photograph the before and after either way.
Linear Motor
Plantation’s HOA entrances use a disproportionate number of linear gate motors, and many of them are early-generation Linear units from the late 1980s and 1990s. Those control boards are largely discontinued now, which creates a real decision point: can this be repaired with a salvage board, or is a full operator changeover the only honest option? We walk every HOA board through that decision with the failed part in hand and a written comparison of both paths.
Slide Motor
Slide gate motors in Plantation get worked hard. The subdivisions off Nob Hill Road and West Broward Boulevard have daily traffic cycles that put thousands of open-close operations per month on each gate. When a slide motor fails, it’s rarely the motor itself. It’s the rack and pinion stripping because the gate has sagged, or a limit switch that’s wandered out of adjustment, or the circuit board that finally gave out after 30 years of Florida heat. We diagnose the actual cause and fix that, not just the symptom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Plantation
We work on whatever motor is already on your Plantation gate. That includes the major automation brands most common in south Florida: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Where the older Plantation HOA communities are concerned, we also maintain the legacy systems other companies walk away from, Eagle Access and first-generation Linear units included. If a piece can be sourced or a board rebuilt, we’ll find that option before we recommend replacement. If replacement is the only sound path, we’ll show you why, in writing, with the failed part photographed.
Common Gate Motor & Opener Problems We See in Plantation Homes
Plantation’s gate failures follow a pattern that has more to do with when the city was built than anything else. Here’s what we’re called for most often:
- Discontinued legacy operator boards: Many of Plantation’s 1980s and 1990s HOA subdivision gates still run Eagle Access and early Linear operators whose control boards are no longer manufactured. A board swap often becomes a full operator changeover. We source remaining stock where it exists, and write the replacement scope when it doesn’t.
- Canal-side hinge post corrosion: Broward County’s canal network threads directly through Plantation neighborhoods like Plantacion and in the acreage lots south of Peters Road. Gate posts and steel frames absorb that moisture constantly. When a post rots or a frame sags, the operator fights the extra load and strips rack and pinion gears on slide gates. We address the structural problem before installing any new motor.
- Builder-grade operators on newer developments: Some of Plantation’s more recent construction uses gate operators that were adequate for the sales phase but not for a decade of daily cycling. These units often lack battery backup entirely, which means the first hurricane-related outage leaves the community gate dead. We retrofit battery systems into existing slide and swing operators regularly.
- Automation added to manual gates without proper conduit: In Plantation Acres, we frequently see ornamental gates that were originally installed manual and automated later with surface-run wire and undersized conductors. The wire corrodes at the hinge post, or the operator starves for current and burns out. We repull new THWN-rated conductors through buried schedule 40 PVC and correct the installation to code.
Pricing for Gate Motor & Opener in Plantation, FL
You should see the numbers before you call us, so here they are for Plantation’s market. A standard gate operator repair runs $225 to $480 for most residential calls. Motor replacement on an existing gate, including labor and common swing or slide operators, runs $1,200 to $2,800. Full operator changeovers on HOA entry gates, especially where legacy boards are discontinued and the entire drive train needs updating, run $2,400 to $4,800. Battery backup retrofits add $350 to $900 depending on the operator and enclosure.
What moves the number? Gate size, whether the post or track needs structural work, the length of the power run, and whether we’re matching an existing HOA-specified brand or replacing a discontinued system. All of it gets written down, line by line, before we begin. Every Plantation job includes a free estimate and a documented photo record when the work is done.
We Also Serve Cities Near Plantation
Our technicians run daily routes through Fort Lauderdale, Margate, Pompano Beach, and Hollywood in addition to Gate Motor & Opener in Plantation work. If you’re managing a property in a nearby Broward community or maintain gates across several HOA properties, one call covers the route. The same written pricing and documentation standard applies everywhere we send a crew.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Plantation
The control boards for Eagle Access and early-generation Linear operators were discontinued years ago, and remaining salvage stock in Broward County is nearly exhausted. When the board fails on one of these 1980s or 1990s systems, we can sometimes source a rebuilt unit, but most Plantation HOA gates end up needing a full operator changeover because the drive components are equally worn and no longer meet current safety code. We’ll show you the failed board and write both options before you commit to either. Call (754) 399-1474 for an on-site assessment and written quote.
Yes, and we do it often. Most Plantation Acres estate gates were built as manual ornamental iron or ranch-style wood gates, and automating them properly requires more than bolting on an operator. The power run is usually missing, the hinge post often needs a new footing or rewelding, and the gate itself may need reinforcement to handle repeated cycling. We handle the full scope: new buried conduit, correctly sized operators like FAAC S800H for heavy custom gates, safety photocells, and a written record of everything installed. The job starts with a free measure and a written scope.
We handle corrosion on hinge posts and steel gate frames throughout Plantation’s canal-adjacent neighborhoods, and we treat it as the primary repair, not a side note. A gate sagging from a rotted post will destroy any new motor you mount on it within a year. We replace or reinforce the post, correct the gate alignment, and only then install or recommission the operator. The repair is photographed at each stage and included in your job file.
For dual-swing gates at HOA entrances that cycle hundreds of times per day, we typically recommend a linear-arm operator from LiftMaster or FAAC, sized to the gate weight and leaf length, with a loop detector and safety photocells wired in. Many of Plantation’s older communities still have the original single-arm operators that were code-compliant in 1987 but aren’t now. We spec the replacement to current Florida Building Code wind-load and safety standards, and we document the limit-switch settings so future service doesn’t start from zero. Call (754) 399-1474 and we’ll measure your gates and write the scope.
Yes. Most slide gate operators in Plantation, particularly the builder-grade units on newer developments, have no battery backup at all. We retrofit sealed battery modules into the existing operator enclosure wherever the unit supports it, and where it doesn’t, we can replace the operator with one that does while reusing your existing track and gate structure. Given Broward County’s hurricane exposure and the frequency of post-storm power outages in Plantation, a battery backup keeps the gate functioning when the neighborhood goes dark. Estimates are free and always written before work begins.
Contact Vance Gate Repair for Gate Motor & Opener Service in Plantation
If your Plantation gate is making noise, moving slow, or not moving at all, call Vance Gate Repair at (754) 399-1474. We’ll answer the phone, schedule a visit, and hand you a written price before anything gets touched. Every service includes our documented photo record, and every repair carries the 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fee, no expiration date within that year.
Vance Gate Repair Fort LauderdaleServing Plantation, FL and surrounding Broward County communities
Phone: (754) 399-1474
Written by Adrian Vance, Owner at Vance Gate Repair, building documented gate service records for South Florida homeowners since 2014.
Gate Motor & Opener in Nearby Areas